WD3Z-001

Welded Wire Mesh Pattern

Notes: Product photography not to scale. Please download the woven wire spec sheet for more accurate size representation. Always confirm measurements with a physical sample. WD3Z-001 – Welded Wire MeshWD3Z-001

Specification Sheet

The Banker Wire WD3Z-001 is a SANDWICH 2" X 8" MESH .250 X .187 WELDED wire mesh specification. This rectangular mesh can be welded in a variety of alloys including: Stainless Steel, Plain Steel, Weathering Steel, Pre-Galvanized Steel.

Pattern Details

Percent Open:85.5%

Overall Thickness:0.624

Crimp Style: WD3Z

Aspect Ratio:4.00:1

Opening Limitation:1.750

Weight:1.28 lbs./sq. ft.

Available Raw Materials: Click here for more information on Raw Materials

Available Secondary Finishes

PVD Plated Powder Coat

Click here for more information on Secondary Finishes

Custom wire mesh and additional specifications available.

Inquire now or call us at 1-800-523-6772

WD3Z-001

SANDWICH 2” X 8” MESH .250 X .187 WELDED

Pattern Details

Percent Open:85.5%

Aspect Ratio:4.00:1

Weight:1.28 lbs./sq. ft.

Overall Thickness:0.624 in.

Crimp Style:WD3Z

Opening Limitation:1.750 in.

What are your dimensions?

We manufacture every job to size. List the dimensions and any addition details of your job. special notes sections

Please double check that your sizes and materials are within our Maximum Dimensions below.

"Maximum" Dimensions of available raw material configurations

Max. A

Max. B

Raw Material Configuration

240

Notes

*Weight based on the specific density of mild (plain) steel **Maximum sphere diameter which will pass through opening Product specifications are subject to change. Product image is shown at 100% unless stated otherwise. For accuracy, specification sheet must be printed with no scaling. Measurements and data are approximate and should be confirmed with a physical sample.

Shown at 50% scale