WD-301

Ornamental Welded Wire Mesh

Notes: Product photography not to scale. Please download the woven wire spec sheet for more accurate size representation. Always confirm measurements with a physical sample. WD-301 – Ornamental Welded Wire MeshWD-301

Specification Sheet

The WD-301 is a square repeating ornamental welded wire mesh pattern consisting of 2 wires every 6 inches. A standard 48”x96” panel consists of 8 patterns by 16 patterns. A standard 60” x 120” panel consists of 10 patterns by 20 patterns.

Do you have a question or would you like to see a sample of our Ornamental Welded Wire Mesh? Our knowledgeable sales staff can assist you with sample requests, quotes, and any additional questions you may have regarding this Ornamental welded wire mesh pattern. Call us toll-free at 1-800-523-6772, or visit our Request for Quote page.

Pattern Details

Percent Open:87.6%

Overall Thickness:0.384

Crimp Style: WDWD

Aspect Ratio:1.00:1

Opening Limitation:4.808

Weight:0.83 lbs./sq. ft.

Available Raw Materials: Click here for more information on Raw Materials

Available Secondary Finishes

Plated Powder Coat

Click here for more information on Secondary Finishes

WD-301 Photos

Custom wire mesh and additional specifications available.

Inquire now or call us at 1-800-523-6772

WD-301

Pattern Details

Percent Open:87.6%

Aspect Ratio:1.00:1

Weight:0.83 lbs./sq. ft.

Overall Thickness:0.384 in.

Crimp Style:WDWD

Opening Limitation:4.808 in.

What are your dimensions?

We manufacture every job to size. List the dimensions and any addition details of your job. special notes sections

Please double check that your sizes and materials are within our Maximum Dimensions below.

"Maximum" Dimensions of available raw material configurations

Max. A

Max. B

Raw Material Configuration

240

Notes

*Weight based on the specific density of mild (plain) steel **Maximum sphere diameter which will pass through opening Product specifications are subject to change. Product image is shown at 100% unless stated otherwise. For accuracy, specification sheet must be printed with no scaling. Measurements and data are approximate and should be confirmed with a physical sample.