WD-299

Ornamental Welded Wire Mesh

Specification Sheet Contact Us

The WD-299 is a square repeating welded wire mesh pattern of 3 wires every 7.5 inches. A standard 48"x96" panel consists of 6 patterns by 13 patterns. A standard 60"x120" panel consists of 8 patterns by 16 patterns. Do you have a question or would you like to see a sample of our Ornamental Welded Wire Mesh? Our knowledgeable sales staff can assist you with sample requests, quotes, and any additional questions you may have regarding this Ornamental welded wire mesh pattern. Call us toll-free at 1-800-523-6772, or visit our Request for Quote page.

Pattern Details

Percent Open:85.2%

Overall Thickness:0.384

Crimp Style: WDWD

Aspect Ratio: 1.00:1

Opening Limitation: 5.308

Weight: 0.99 lbs./sq. ft.

Available Raw Materials:

Click here for more information on Raw Materials Available Secondary Finishes:

Plated Powder Coat

Click here for more information on Secondary Finishes

What can Banker Wire welded wire mesh do for you?Learn More

Stainless Steel

All Finishes Raw Materials Secondary Finishes

❮

❯

Important Note Regarding Color
Please note that due to the limitations and relative inconsistencies of digital displays, the original and artificially colorized photography above is intended to only be a representation of the raw materials Banker Wire uses and is not a substitution for physical samples. Banker Wire manufactures all wire mesh in a bare mill finished condition. Please always confirm size, color, and finishes of wire mesh patterns with physical samples.

A small hamburger icon, navigation for interior page vertical movement.

Top of Page Pattern Details

Custom wire mesh and additional specifications available.

Inquire now or call us at 262-363-6120

WD-299

Pattern Details

Percent Open:85.2%

Aspect Ratio:1.00:1

Weight:0.99 lbs./sq. ft.

Overall Thickness:0.384

Crimp Style:WDWD

Opening Limitation:5.308 in.

What are your dimensions?

We manufacture every job to size. List the dimensions and any addition details of your job. special notes sections

Please double check that your sizes and materials are within our Maximum Dimensions below.

"Maximum" Dimensions of available raw material configurations

Max. A

Max. B

Raw Material Configuration

240

Notes

*Weight based on the specific density of mild (plain) steel **Maximum sphere diameter which will pass through opening Product specifications are subject to change. Product image is shown at 100% unless stated otherwise. For accuracy, specification sheet must be printed with no scaling. Measurements and data are approximate and should be confirmed with a physical sample.

WD-299

WD-299

Ornamental Welded Wire Mesh

Pattern Details

How can we help?

Give us a call!

WD-299

Pattern Details

What are your dimensions?

"Maximum" Dimensions of available raw material configurations