WD-268

Architectural Welded Wire Mesh Pattern

Specification Sheet Contact Us

The Banker Wire WD-268 is an Architectural welded wire mesh specification. This simple square grid can be manufactured in a variety of alloys including: Stainless Steel, Plain Steel, Weathering Steel as well as a variety of secondary finishes.

Pattern Details

Percent Open:77.4%

Overall Thickness:.240

Crimp Style: WDWD

Aspect Ratio: 1.00:1

Opening Limitation: .880

Weight: 0.92 lbs./sq. ft.

Available Raw Materials:

Click here for more information on Raw Materials Available Secondary Finishes:

Plated Powder Coat

Click here for more information on Secondary Finishes

What can Banker Wire welded wire mesh do for you?Learn More

Stainless Steel

All Finishes Raw Materials Secondary Finishes

❮

❯

Important Note Regarding Color
Please note that due to the limitations and relative inconsistencies of digital displays, the original and artificially colorized photography above is intended to only be a representation of the raw materials Banker Wire uses and is not a substitution for physical samples. Banker Wire manufactures all wire mesh in a bare mill finished condition. Please always confirm size, color, and finishes of wire mesh patterns with physical samples.

A small hamburger icon, navigation for interior page vertical movement.

Top of Page Pattern Details

Custom wire mesh and additional specifications available.

Inquire now or call us at 262-363-6120

WD-268

Antique Copper Plated

Pattern Details

Percent Open:77.4%

Aspect Ratio:1.00:1

Weight:0.92 lbs./sq. ft.

Overall Thickness:.240

Crimp Style:WDWD

Opening Limitation:.880 in.

What are your dimensions?

We manufacture every job to size. List the dimensions and any addition details of your job. special notes sections

Please double check that your sizes and materials are within our Maximum Dimensions below.

"Maximum" Dimensions of available raw material configurations

Max. A

Max. B

Raw Material Configuration

120

Notes

*Weight based on the specific density of mild (plain) steel **Maximum sphere diameter which will pass through opening Product specifications are subject to change. Product image is shown at 100% unless stated otherwise. For accuracy, specification sheet must be printed with no scaling. Measurements and data are approximate and should be confirmed with a physical sample.