WD-118

Welded Wire Mesh Pattern

Notes: Product photography not to scale. Please download the woven wire spec sheet for more accurate size representation. Always confirm measurements with a physical sample. WD-118 – Welded Wire MeshWD-118

Specification Sheet

The Banker Wire WD-118 is a 3" OPG .135 WELDED wire mesh specification. This square mesh can be welded in a variety of alloys including: Stainless Steel, Plain Steel, Weathering Steel, Pre-Galvanized Steel, Galfan.

Pattern Details

Percent Open:91.6%

Overall Thickness:0.270

Crimp Style: WDWD

Aspect Ratio:1.00:1

Opening Limitation:3.000

Weight:0.37 lbs./sq. ft.

Available Raw Materials: Click here for more information on Raw Materials

Available Secondary Finishes

Plated Powder Coat

Click here for more information on Secondary Finishes

Custom wire mesh and additional specifications available.

Inquire now or call us at 262-363-6120

WD-118

Pattern Details

Percent Open:91.6%

Aspect Ratio:1.00:1

Weight:0.37 lbs./sq. ft.

Overall Thickness:0.270 in.

Crimp Style:WDWD

Opening Limitation:3.000 in.

What are your dimensions?

We manufacture every job to size. List the dimensions and any addition details of your job. special notes sections

Please double check that your sizes and materials are within our Maximum Dimensions below.

"Maximum" Dimensions of available raw material configurations

Max. A

Max. B

Raw Material Configuration

240

Notes

*Weight based on the specific density of mild (plain) steel **Maximum sphere diameter which will pass through opening Product specifications are subject to change. Product image is shown at 100% unless stated otherwise. For accuracy, specification sheet must be printed with no scaling. Measurements and data are approximate and should be confirmed with a physical sample.

Shown at 60% scale.

WD-118

WD-118

Welded Wire Mesh Pattern

Pattern Details

Products Similar to WD-118

WD-118

Pattern Details

What are your dimensions?

"Maximum" Dimensions of available raw material configurations