Banker Wire – Your Wire Mesh Manufacturing Partner

WD-012

Welded Wire Mesh Pattern

Specification SheetContact Us
The Banker Wire WD-012 is a 2.5" MESH .148 WELDED wire mesh specification. This square mesh can be welded in a variety of alloys including: Stainless Steel, Plain Steel, Weathering Steel, Pre-Galvanized Steel.

Pattern Details

Percent Open:88.5%

Overall Thickness:0.296

Crimp Style: WDWD

Aspect Ratio: 1.00:1

Opening Limitation: 2.352

Weight: 0.56 lbs./sq. ft.

Available Raw Materials:
stainless materialplain-steel materialweathering-steel materialpre-galv material
 
Click here for more information on Raw MaterialsAvailable Secondary Finishes:
PlatedPowder Coat
 
Click here for more information on Secondary Finishes
Welded Wire Mesh about image
What can Banker Wire welded wire mesh do for you?Learn More
WD-012 ruler image
Notes: Product photography not to scale. Please download the woven wire spec sheet for more accurate size representation. Always confirm measurements with a physical sample. WD-203 – Welded Wire MeshWD-203
 
A small hamburger icon, navigation for interior page vertical movement. Top of Page Pattern Details Related Projects Related Press Related Products

WD-012

banker wire logo for our print page
 
print ready image for WD-012 img b height marker img a height marker

Pattern Details

Percent Open:88.5%

Aspect Ratio:1.00:1

Weight:0.56 lbs./sq. ft.

Overall Thickness:0.296

Crimp Style:WDWD

Opening Limitation:2.352 in.

What are your dimensions?

We manufacture every job to size. List the dimensions and any addition details of your job. special notes sections Please double check that your sizes and materials are within our Maximum Dimensions below.

"Maximum" Dimensions of available raw material configurations

Max. A
Max. B
Raw Material Configuration
 
240
78
printable material iconprintable material iconprintable material iconprintable material icon
 
*Maximum Dimension May Need To Be Reduced Pending A Secondary Finish Limitation
 
Notes

*Weight based on the specific density of mild (plain) steel **Maximum sphere diameter which will pass through opening Product specifications are subject to change. Product image is shown at 100% unless stated otherwise. For accuracy, specification sheet must be printed with no scaling. Measurements and data are approximate and should be confirmed with a physical sample.

Banker Wire | 123 W Boxhorn Drive | Mukwonago, WI 53149 | Toll Free 800-523-6772 | Phone +1 262-363-6120 | Email [email protected]