SZ-4

right arrow
SZ-4 Angle in Stainless/Copper Woven Wire Mesh
SZ-4 Angle in Stainless/Copper Woven Wire Mesh
SZ-4 in Stainless/Copper Woven Wire Mesh
SZ-4 Angle in Stainless/Bronze Woven Wire Mesh
SZ-4 in Stainless/Bronze Woven Wire Mesh
SZ-4 in Stainless/Brass Woven Wire Mesh
SZ-4 in Stainless Woven Wire Mesh
a arrow
Shown in copper and stainless steel.

Pattern Details

Percent Open: 
41.1%
Overall Thickness: 
0.140
Aspect Ratio: 
1.27
Crimp Style: 
E1PLZ
Weight: 
1.63
Opening Limitation: 
0.160
Max A: 
120inches
Max B: 
72inches

Available Raw Materials: 

  • 00 - Stainless Steel Wire Mesh
  • 09 - Stainless Steel and Bronze Wire Mesh
  • 10 - Stainless Steel and Brass Wire Mesh
  • 11 - Stainless Steel and Copper Wire Mesh

Available Secondary Finishes

Banker Wire offers a wide variety of secondary finishes through our outside vendors that can further enhance the aesthetic of any project. For more information, read about secondary finishes here.

PlatedPowder CoatUS10AUS10BPVD

Customization Options:

Customization of any wire mesh pattern is easy.  Banker Wire’s 100+ years of manufacturing experience makes it possible to create the wire mesh you envision right for your project.  We are likely to already have the tooling to produce what you are looking for and if not, we can design new tooling to make it within a few days.  

lightbult icon

Customization of any wire mesh pattern is easy. Banker Wire's 100+ years of manufacturing experience makes it possible to create the wire mesh you envision right for your project. We are likely to already have the tooling to produce what you are looking for and if not, we can design new tooling to make it within a few days. Please contact us for more information.

800-523-6772
+44 (0) 1795 228 583
Notes

*Weight based on the specific density of mild (plain) steel **Maximum sphere diameter which will pass through opening Product specifications are subject to change. Product image is shown at 100% unless stated otherwise. For accuracy, specification sheet must be printed with no scaling. Measurements and data are approximate and should be confirmed with a physical sample.

Wire Mesh Pattern: SZ-4

Stainless melded with bronze-aged copper, round wire melded with flat, the SZ-4 wire mesh pattern uses modern technology to create a unique weave that changes with the viewer’s angle. Available with other metal choices as well, this very strong, multipurpose fabric is an excellent choice for canopies, divider screens and railing infill panels. Bring your next project to Banker Wire, the worldwide leader in wire mesh, and we’ll help you create something extraordinary. 

The SZ-4 can either be woven as a mixed metal weave or in all stainless.  When mixing alloys, the flat wire (Warp) must remain stainless and round wire can be either Copper, Bronze, or Brass.  

Customization Options:

Customization of any wire mesh pattern is easy.  Banker Wire’s 100+ years of manufacturing experience makes it possible to create the wire mesh you envision right for your project.  We are likely to already have the tooling to produce what you are looking for and if not, we can design new tooling to make it within a few days.  

800-523-6772
+44 (0) 1795 228 583

Notes

Product photography not to scale. Please download the wire mesh and woven wire spec sheet for more accurate size representation. Always confirm measurements with a physical sample.

All weight measurements are based on the specific density of mild (plain) steel. For conversion information, please refer to the Weights and Conversions section of our Woven Wire Basics Page or, contact us.

It should be noted that architectural fabrics produced from very smooth, diamond drawn wires will, at times, exhibit striations of varying degrees of light and dark. These are not defects, but rather, part of the natural beauty of the material.

Maximum dimensions may change based on alloy selection. Please contact us for additional details.