L-440

L-440

Woven Wire Mesh Pattern

Specification Sheet Contact Us

The Banker Wire L-440 is a 1" MESH .092 woven wire mesh specification. This square weave can be woven in a variety of alloys including: Brass, Bronze, Copper, Plain Steel, Pre-Galvanized Steel, Stainless Steel.

Pattern Details

Percent Open:82.4%

Overall Thickness:.184

Crimp Style: LCLC

Aspect Ratio: 1.00:1

Opening Limitation: .908

Weight: 0.57 lbs./sq. ft.

Available Raw Materials:
stainless materialplain-steel materialpre-galv materialbrass materialbronze materialcopper material
 
Click here for more information on Raw Materials Copper, Brass and Bronze are Living Finishes. Learn moreliving finish Available Secondary Finishes:
PlatedPowder CoatUS10AUS10B
 
Click here for more information on Secondary Finishes
L-440 ruler image
Notes: Product photography not to scale. Please download the woven wire spec sheet for more accurate size representation. Always confirm measurements with a physical sample. WD-203 – Welded Wire MeshWD-203
 
A small hamburger icon, navigation for interior page vertical movement. Top of Page Pattern Details Related Projects Related Press Related Products

We use cookies to improve your experience on our website. By closing this banner or interacting with our site, you acknowledge and agree to this.

L-440

banker wire logo for our print page
 
print ready image for L-440 img b height marker img a height marker

Pattern Details

Percent Open:82.4%

Aspect Ratio:1.00:1

Weight:0.57 lbs./sq. ft.

Overall Thickness:.184

Crimp Style:LCLC

Opening Limitation:.908 in.

What are your dimensions?

We manufacture every job to size. List the dimensions and any addition details of your job. special notes sections Please double check that your sizes and materials are within our Maximum Dimensions below.

"Maximum" Dimensions of available raw material configurations

Max. A
Max. B
Raw Material Configuration
 
1200
96
printable material iconprintable material iconprintable material iconprintable material iconprintable material iconprintable material icon
 
 
Notes

*Weight based on the specific density of mild (plain) steel **Maximum sphere diameter which will pass through opening Product specifications are subject to change. Product image is shown at 100% unless stated otherwise. For accuracy, specification sheet must be printed with no scaling. Measurements and data are approximate and should be confirmed with a physical sample.

Banker Wire | 123 W Boxhorn Drive | Mukwonago, WI 53149 | Toll Free 800-523-6772 | Phone +1 262-363-6120 | Email [email protected]
print image

Shown at 60% scale.

Banker Wire | 123 W Boxhorn Drive | Mukwonago, WI 53149 | Toll Free 800-523-6772 | Phone +1 262-363-6120 | Email [email protected]