DT-16

Opaque Woven Wire Mesh Pattern

Specification Sheet Contact Us

The DT-16 architectural wire mesh pattern is part of our latest exploration in weaving with 5 heddle frames. The unique rhythmic pattern looks like it could be found on an oscilloscope. This mesh pattern would look great used as an architectural cladding material. The robust nature of woven wire mesh makes this a good choice to display and protect.

Pattern Details

Percent Open:0.0%

Overall Thickness:.189

Crimp Style: PDTWZ

Aspect Ratio:1.92:1

Opening Limitation:0.00

Weight:3.26 lbs./sq. ft.

Available Raw Materials: Click here for more information on Raw Materials

Available Secondary Finishes

US10A

Click here for more information on Secondary Finishes

Stainless Steel

All Finishes Raw Materials Secondary Finishes

❮

❯

Important Note Regarding Color
Please note that due to the limitations and relative inconsistencies of digital displays, the original and artificially colorized photography above is intended to only be a representation of the raw materials Banker Wire uses and is not a substitution for physical samples. Banker Wire manufactures all wire mesh in a bare mill finished condition. Please always confirm size, color, and finishes of wire mesh patterns with physical samples.

DT-16

Pattern Details

Percent Open:0.0%

Aspect Ratio:1.92:1

Weight:3.26 lbs./sq. ft.

Overall Thickness:.189 in.

Crimp Style:PDTWZ

Opening Limitation:0.00 in.

What are your dimensions?

We manufacture every job to size. List the dimensions and any addition details of your job. special notes sections

Please double check that your sizes and materials are within our Maximum Dimensions below.

"Maximum" Dimensions of available raw material configurations

Max. A

Max. B

Raw Material Configuration

120

Notes

*Weight based on the specific density of mild (plain) steel **Maximum sphere diameter which will pass through opening Product specifications are subject to change. Product image is shown at 100% unless stated otherwise. For accuracy, specification sheet must be printed with no scaling. Measurements and data are approximate and should be confirmed with a physical sample.

DT-16

DT-16

Opaque Woven Wire Mesh Pattern

Pattern Details

Products Similar to DT-16

DT-16

Pattern Details

What are your dimensions?

"Maximum" Dimensions of available raw material configurations